CABLING CONNECTOR & BALUN

Home >> CABLING CONNECTOR & BALUN

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 2&5

3-1134

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 3&4

3-1134-2

3X/AS400 Twinax to RJ-11; Active pins 3&4; 2 in twinax tail

3-1143

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 4&3

3-1143-2

AS400 Twinax Balun Replaces twinax cable with low-cost twisted pair. Connects workstation to 3X or AS/400 system in either a daisy chain or star type topology. RJ-11; Active pins 4&3; 2 in. twinax tail

B-1134

IBM® 3270 Coax Baluns RJ-11; Active pins 3&4 Connect 3270 category "A" devices using unshielded twisted pair wiring. Maximum distance of 2,500 ft. (759 m)

B-1143-6

IBM 3270 Coax BNC to RJ-11; Active pins 4&3; 6 inch coax tail

B-4512

IBM 3270 Coax BNC to RJ-45; Active pins 1&2; no tail

B-4521

IBM 3270 Coax BNC to RJ-45; Active pins 2&1; no tail

B-4545

IBM 3270 Coax BNC to RJ-45; Active pins 4&5; no tail

B-4554

IBM 3270 Coax BNC to RJ-45; Active pins 5&4; no tail

B-4554-6

IBM 3270 Coax BNC to RJ-45; Active pins 5&4; 6 in coax tail

ICS-45-100TX-C

Impedance Matching Devices Fast Ethernet IBM Type 1 (150 ohm) to Type 3 (105 ohm) UTP (Functionally equivalent to AMP P/N 558420-1) Converts a four position data connector to RJ-45 (female.) Converts the impedance of IBM Type 1 (150 ohm) shielded cable to Type 3 (105 ohm) UTP. Matching the impedance allows use of shielded Type 1 cabling for your LAN without installing additional 105 ohm UTP.

ICS-45-CA

TokenMod™ Adapter (Functionally equivalent to AMP 555414-2) Type 1 to RJ-45; Active pins 3,4,5,6 Converts a Type 1 data connector to an RJ-45 connection. Can be used to convert devices (like IBM 8228) to UTP.

ICS-45-CN

TokenMod™ Adapter (Functionally equivalent to Nevada Western 037-040-35-07) Type 1 to RJ-45; Active pins 3,4,5,6 Converts a Type 1 data connector to an RJ-45 connection. Can be used to convert devices (like IBM 8228) to UTP.